Recycled water filling stations

City of Gold Coast operates 9 recycled water filling stations. All filling stations are accessed through an automated system which requires an access device from the City.

Our filling stations are fitted with a 63-millimetre (2.5 inches) male cam lock fitting. You will need your own 63-millimetre female fitting.

All recycled water filling stations supply points require an access device to obtain recycled water.

Site Address Access requirements
Alberton

Zipfs Park – cricket ground
Zipfs Road, Alberton

24 hour access
63mm camlock fitting

Beenleigh

Beenleigh Sewage Treatment Plant
End of Logan Street, Eagleby

24-hour access
63mm cam lock fitting

Benowa
Temporarily closed until further notice

Old Wastewater Treatment Plant
Racecourse Drive, Benowa

24 hour access
63mm camlock fitting

Currumbin
Temporarily closed until further notice

Carpark at clubhouse Salk Oval
Sarawak Avenue, Currumbin

24 hour access
63mm camlock fitting

Coombabah

Wastewater Treatment Plant
End of Shelter Road, Coombabah

6am to 6pm
Security access card for 24 hour access
63mm camlock fitting

Elanora

Elanora Wastewater Treatment Plant
End of Tallebudgera Drive, Elanora

24 hour access
Security access card
63mm camlock fitting

Merrimac

Merrimac Wastewater Treatment Plant
Boowaggon Road, Merrimac

24 hour access
Security access card
63mm camlock fitting

Parkwood

Beside - Sharks Junior Rugby League Club
Access road off Musgrave Avenue

24 hour access
63mm camlock fitting

Pimpama

Wastewater Treatment Plant
Kerkin Road North, Pimpama

24 hour access
Security access card
63mm camlock fitting

Station operating instructions

  1. Park the vehicle close to the filling point without obstructing other users.
  2. Connect the outlet of the filling point to approved vessel.
  3. Open valve to suit your requirements.
  4. Place the access key on the reader for validation.
    • Light on = valid key – go to Step 5.
    • Light flashing = invalid key – contact us during office hours.
  5. Press ‘ON’ button to start delivery of recycled water.
    • Light on = water is flowing.
    • Light flashing = water is not flowing – contact us to report the fault.
  6. Close the valve.
  7. Press ‘OFF’ button to stop the delivery of recycled water.
  8. Disconnect the hose.
  9. Move away to allow other users to access the filling station.